Stone Moldings and Railings
Door and window surrounds, cornices, balustrades and handrails profiled to your drawings in marble, limestone and granite, supplied as numbered sets.
Mouldings are the linear details that make a facade read as architecture rather than as a surface: door and window surrounds, cornices, belt courses, baseboards, and the balustrades and handrails along balconies and stairs. All of them are run to a cross-section. Send a profile drawing or a sample piece and we replicate it by CNC profiling, so fifty metres of the same cornice comes out identical.
Moldings and railings are the linear details that tie a building together — door and window surrounds, cornices and belt courses, baseboards and chair rails inside, and balustrades, handrails and baluster rows along balconies, stairs and terraces. We run all of these profiles in our factory, cut to order in natural stone.
Profiles are cut from your detail. Send a cross-section drawing or a sample piece and we replicate it with CNC profiling for consistent runs — dozens of meters of the same cornice come out identical — with hand finishing on carved ornaments, rosettes and panel reliefs. Balustrades are supplied as complete sets: handrail, turned or square balusters, including classical vase-shaped balusters, plinth and newel posts, dry-fitted and numbered in the workshop before crating.
Material follows exposure: marble and limestone for interior work and sheltered facades; granite for exterior balustrades on roof terraces and waterfront villas where weather resistance matters. We can also match existing molding on restoration projects.
Long runs pack efficiently for container shipping. Send your profiles and quantities — request a quote for stone moldings and railings.
Browse by use
| What the profile is for | What to specify | Link |
|---|---|---|
| Door or window surround | Section drawing plus the opening size; corners mitred and numbered | /products/architectural-stone-carvings/porches |
| Cornice or belt course on a facade | Long runs in one profile, run to a consistent section, packed for container | /products/architectural-stone-carvings |
| Balcony or terrace balustrade | Complete set: handrail, balusters, plinth, newel posts, dry-fitted | /products/architectural-stone-carvings |
| Stair handrail in stone | Profile cut to the stair rake; curves and ramps cut from the drawing | /products/interior-stone/staircase-steps-and-thresholds |
| Interior skirting or chair rail | Marble or limestone, smaller section, honed rather than polished | /products/interior-stone |
| Restoration of an existing profile | Send a sample piece or a rubbing of the section; we replicate it | /products/architectural-stone-carvings |
Why a moulding is a section, not a picture
A photograph shows you what a cornice looks like from the street; it does not tell a machine what to cut. What a machine needs is the cross-section: the sequence of fillets, coves, ovolos and steps that make up the profile, with dimensions. Send that and the run is repeatable. Send a photograph and the first job is a site visit or a rubbing.
Consistency is the whole value of CNC profiling on a long run. Fifty metres of cornice cut by hand will vary enough that the eye catches it at a joint; fifty metres cut to one section and hand-finished will not. Ornament — rosettes, panel reliefs, carved brackets — is still finished by hand, because that is where the variation is supposed to be.
Balustrades are sold as complete sets for the same reason. A handrail, a plinth, newel posts and a run of vase-shaped balusters have to be spaced and aligned, and the set has to be dry-fitted so the balusters actually sit in their sockets. Supplied piecemeal, the spacing drifts along the run and the last bay is always the problem.
FAQ
What do you need to match a profile?
A cross-section drawing, or a sample piece, or a rubbing of the section with one known dimension. From that we cut a profile and run it. A photograph alone is not enough to set a machine.
How consistent are long runs?
Identical, because the profile is cut by CNC from one section. Carved ornament is hand-finished, so rosettes and reliefs carry tool variation by design. On a facade, that is the difference between a run that reads as one and a run that reads as a series of pieces.
Do balustrades come as a complete set?
Yes — handrail, turned or square balusters including classical vase shapes, plinth and newel posts, dry-fitted and numbered in the workshop before crating. Supplied piecemeal, the baluster spacing drifts along the run.
Which stone for exterior mouldings?
Granite for exposed balustrades on roof terraces and waterfront villas. Marble and limestone for interiors and sheltered facades. On a coastline, salt decides it — limestone mouldings on a sea-facing balcony will not last.
Can you match mouldings on a restoration?
Yes, that is a routine job. Send a sample piece or a rubbing. We can also reproduce a damaged section by casting from the surviving part and profiling to it.
How are long runs packed?
On timber bearers, banded by profile, with the carved faces protected and the run sequence marked. Long sections pack efficiently into a container, which is why the freight per metre drops as the order grows.
Send the section drawing or a sample, the total run length and the exposure, and we reply with the profile confirmation, the balustrade set layout if relevant, and a price per linear metre with crating included.
Request a Quote