Mosaic
Mosaic
Mosaic is the smallest format natural stone comes in, and the reason it still exists is that small pieces can follow a curve, a dome or a pattern that no slab can. Tesserae run from 10mm to 50mm, cut from the same blocks as our slabs and pre-mounted on mesh so the installer sets sheets rather than individual pieces. Standard patterns start at 10 square metres; custom designs at 30.
Browse by use
| Where the mosaic goes | What to specify | Link |
|---|---|---|
| Bathroom wall or shower niche | 10–20mm tesserae, mesh backed, honed so it grips underfoot on the floor | /products/interior-stone/floor-tiles-and-wall-tiles |
| Curved wall or column | Small tesserae only — anything above 25mm will not follow the radius | /products/interior-stone |
| Pool interior or waterline | Glass or stone mosaic, sealed, with the joint width stated | /products/outdoor-stone/pool-copings-and-deckings |
| Feature panel with a drawn pattern | Custom water-jet cut, from 30 sqm, 25–35 days production | /products/mosaic-and-medallion/water-jet-medallions |
| Border or frame around a medallion | Cut from the same stone as the field so the tones agree | /products/mosaic-and-medallion/water-jet-medallions |
| Floor inlay in a lobby | 20–50mm tesserae, honed, laid with a tight joint and a level bed | /products/interior-stone |
Why the tessera size is a construction decision
A mosaic is only as good as its substrate. Small tesserae on mesh will follow a curve or a compound surface because each piece is effectively independent; a 50mm tessera on the same curve will lift at the corners and the joint will open. So the radius decides the size, not the pattern. Tell us the radius and we will tell you the maximum tessera.
Mesh backing is what makes it installable. Loose tesserae mean the installer sets every piece by hand, which is a different trade at a different price. Sheets keep the pattern intact and let a tiler cover a wall in a day. The trade-off is that the mesh has to be compatible with the adhesive — a paper-faced sheet and a cement-based adhesive is a failure waiting for the first wet season.
And mosaic is unforgiving about the bed. On a floor, a 2mm variation in the substrate reads as a visible wave across a small-format surface, far more than it would on a slab. The bed has to be flat before the first sheet goes down, and no amount of grout hides it.
FAQ
What tessera sizes do you cut?
From 10×10mm to 50×50mm as standard, with other modules cut to order. The size is normally set by the radius or the pattern rather than by taste — small formats follow curves, larger formats read as a cleaner field.
What is the minimum order?
10 square metres for standard patterns, 30 square metres for custom designs. Custom water-jet cut mosaic runs 25–35 days in production.
Is the mosaic mesh backed or paper faced?
Mesh backed, so it goes down with a standard thin-bed adhesive and the pattern stays intact. Tell us the adhesive system you plan to use and we will confirm compatibility — paper-faced mosaic with the wrong adhesive is a common failure.
Can mosaic be used in a shower or a pool?
Yes, and it is the usual choice for a pool interior because small pieces tolerate movement. Seal the stone, state the joint width, and use an epoxy grout in a pool. In a shower, honed tesserae on the floor and polished on the wall is the sensible split.
Can you match the mosaic to my slab?
Yes, if both come from the same block lot. We cut tesserae from our slab stock, so the colour matches by construction rather than by hope. Send the slab reference.
How is mosaic packed?
Sheets stacked face to face in a carton, on a pallet, with the pattern sequence numbered if the design runs across several sheets. A pattern that is packed out of sequence is a pattern that gets installed wrong.
Send the area, the radius if there is one, the tessera size and the pattern, and we reply with a sheet layout, a sample photograph and a price per square metre with cartons and pallet included.
Request a Quote