Curbstones and Kerbs

Granite road curbing, drop kerbs, radius curbs and garden edging cut to standard and custom profiles with flamed non-slip faces.

A kerb is the only stone on a road that every vehicle touches. It is specified by profile, by length and by the way it is jointed, and it fails for exactly one reason: the wrong granite, or the right granite cut too thin at the arris. We cut straight, chamfered and bullnose profiles from granite we hold in Shuitou, flamed for grip, and ship banded by profile so a long run stays consistent.

Curbstones — also called kerbs, curbs or edging stones — separate roads from sidewalks and hold the edge of driveways, paths, flower beds and landscaping. We cut them in granite, the material municipalities and contractors choose because it absorbs almost no water, survives frost and de-icing salt, and keeps its shape after years of traffic.

We supply the common standard profiles: straight curb stones in the usual road kerb dimensions, radius curbs for corners, drop curbs and crossover kerbs for vehicle access, plus flat garden edging. Tops and edges can be left sawn, bullnosed or chamfered to your specification, and faces are available with a flamed or bush-hammered non-slip finish. Custom lengths, heights and colors — grey, black, white and red granite — are all cut to order, so odd layouts and heritage-style street work are not a problem.

Orders ship on pallets or in crates, bundled by size for easy site handling, and we regularly export full containers for municipal and developer projects.

Send your dimensions, profile drawing and quantity, and request a quote for granite curbstones.

Browse by use

What the kerb runs alongWhat to specifyLink
Municipal road edgeStraight profile, flamed top and face, chamfered arris, length matched to the laying gang's reach/products/outdoor-stone
Driveway or forecourt edgeLower profile than a road kerb so a car can cross it without grounding/products/outdoor-stone/pavers-and-stone-paving
Garden bed edgingBullnose or half-round top for a soft edge; setts on end are an alternative/products/outdoor-stone/cube-stones
Step cheek or side faceMatched to the tread stone so the flight reads as one material/products/outdoor-stone/steps-and-stairs
Car park islandChamfered both sides so a wheel deflects rather than catches/products/outdoor-stone
Water feature or planter rimBullnose top, sealed, with the joints pointed rather than open/products/outdoor-stone

Why the profile and the arris decide the service life

A kerb fails at the edge, not in the middle. Where the top meets the face, a square arris chips the first time a wheel or a snow plough touches it, and once the arris is gone the kerb reads as damaged along its whole run. A chamfer spreads that load and a bullnose removes the corner entirely, which is why municipal specifications call for one of the two.

The granite has to be the right family. Kerbs take salt, freeze-thaw and abrasion, and a stone that absorbs water will spall its face within a few winters. Our granite for kerbs tests at 0.22% water absorption with 200 MPa compressive strength, so it is specified for exactly this duty. Aesthetic stone belongs on a facade, not on a road edge.

Length is a logistics decision as much as a stone one. A kerb is heavy, and a run that is too long for the laying gang to handle means more breakage and slower progress. We cut to the length your specification asks for and band the shipment by profile, so a kilometre of kerb does not turn into a kilometre of sorting on site.

FAQ

What profiles do you supply?

Straight with a chamfered arris, straight with a square arris, and bullnose or half-round tops for garden and landscape edges. Non-standard profiles are cut to a drawing — send the section and we will confirm what we can hold.

Which granite is right for a kerb?

A frost-resistant granite with low absorption. Our material tests at 0.22% water absorption, 2,680 kg/m³ bulk density, 15 MPa flexural and 200 MPa compressive strength, Mohs 6–7 — the combination that survives salt, frost and abrasion on a road edge.

What surface finish should the top have?

Flamed or thermal, for grip when wet. A polished kerb is a hazard and is not used outdoors. The face is normally flamed as well so the run reads consistently.

Can you cut to a municipal specification?

Yes. Send the section drawing, the required length and the tolerance, and we cut to it and state the tolerance we hold on the packing list. We do not substitute a stock profile for a specified one.

How are kerbs packed for export?

Banded by profile on timber bearers, strapped, and photographed before the container is sealed. Long runs are packed so the banding matches the laying sequence where the order allows.

What is the minimum order?

A container-load is the sensible unit for kerb because the freight is the cost. Tell us the run length and the profile and we will work out how much fits and whether a mixed container with paving or setts makes sense.

Send the section drawing, the run length and the finish, and we come back with the cut specification, the tolerance we hold, and a price per linear metre with banding and crating included.

Request a Quote