Stone Tables

Elegant stone table tops and complete tables

A stone table is a piece of furniture, not a slab on legs. What decides whether it works is the span between supports, the overhang at the edge and how the top is fixed to the base — get those wrong and a beautiful top rocks on the floor or cracks in transit. We cut and finish table tops to your drawing, and we will tell you the maximum size before you commit to a slab.

Browse by use

What you are furnishingWhere to goLink
Dining, coffee, console and side tablesTable Tops/products/stone-tables/table-tops
Tulip and pedestal silhouettesMarble tulip table/tag/marble-tulip-table
Cream marble dining tablesCream marble dining table/tag/cream-marble-dining-table
Cream marble coffee tablesCream marble coffee table/tag/cream-marble-coffee-table
Table tops care and installationRed Sandalwood table tops installation and care/knowledge/installation-maintenance/red-sandalwood-table-tops-installation-care

Why order stone tables from the workshop

Oval, boat-shaped, free-form and multi-level tops are all cut to dimension; the slab size is the only real limit, and we tell you what it is before you commit to a shape.

Past roughly 2400–2800mm we mirror two consecutive slices from the same block, so the joint disappears into the veining instead of cutting across it.

The top is dry-fitted to the base before packing and both are crated together with edge reinforcement, so the piece arrives square and the base already fits.

FAQ

How big can a single-piece stone dining table be?

It follows the slab. Our full-size slabs typically run 2400–2800mm long by 1200–1600mm wide, so a single-piece rectangular table up to about 2400mm is comfortable. Past that we bookmatch two slices from the same block — the seam sits inside the veining, and you get a table that reads as one surface.

How many people does a 2400mm table seat?

Six to eight. A rectangular top of 1800–2400mm by 900–1100mm seats six to eight with the overhang calculated so elbows are supported without the edge becoming a lever. Round tops of 1200–1500mm diameter seat four to six and give every seat the same view of the surface, which is why they suit iridescent stones.

What base works with a stone top?

Metal, and it has to be drawn with the top. Brushed brass, blackened steel and polished chrome are the three we see most; a single pedestal lets the stone float visually, a trestle or twin-pedestal base suits long rectangular tops. We dry-fit the top to the base before packing so the fixing points and the overhang are already correct.

Will a stone table top crack in transit?

Not if it is packed for the sea leg. Each top travels in a fumigated crate with foam protection and edge reinforcement, and heavy tops are braced rather than laid flat on the base. Thermal shock is the other risk and it happens on site, not in the container — use trivets under hot dishes, since sudden temperature change near a fissure is what actually cracks stone.

Can you match a table to my countertops?

Yes, if both are ordered together. We cut table tops from the same block lot as the kitchen or vanity tops so the dining table and the island do not drift in tone — that drift is the usual complaint when the two are bought separately months apart.

Do you make outdoor tables?

Yes, but the material changes. For a garden or terrace table we specify dense granite or a stone with low absorption rather than marble, and we leave the top unpolished or honed for grip. Tell us the climate and whether the table stays out year round, and we will route you to the right stone instead of the prettiest one.

Send the drawing — top dimensions or shape, base type, edge profile and how many people it needs to seat — and we return a quote with the maximum single-piece size and the bookmatched alternative side by side.

Request a Quote