Exterior Wall Claddings
Exterior Wall Claddings
A facade is specified on weight and on what happens at the fixing, not on the colour swatch. An 18mm porcelain panel is rigid enough for a ventilated rainscreen and light enough that the sub-frame does not double in cost; 30mm natural stone is heavier, more forgiving of a bad substrate and reads as real stone at close range. We supply both and will say which one your structure and your budget actually support.
Available Stones

Sea Wave Granite
Origin: China
Chinese white granite with fine flowing gray veining, cut-to-size pavers and outdoor paving stones

Porcelain Wall Cladding
Origin: China
18mm full-body porcelain wall cladding tiles — stone, travertine and wood looks in polished, soft-honed and matte finishes for ventilated facades
Browse by use
| Where it goes | What to specify | Link |
|---|---|---|
| Mid-rise facade on a rainscreen | 18mm porcelain on an aluminium sub-frame, clipped or bonded | /products/outdoor-stone/exterior-wall-claddings/porcelain-cladding |
| Entrance elevation that has to read as stone | 30mm natural stone, or polished porcelain where weight is the constraint | /products/outdoor-stone/exterior-wall-claddings |
| Boundary wall or garden wall | 18mm porcelain bonded, or a split-face stone for texture | /products/outdoor-stone/exterior-wall-claddings/porcelain-cladding |
| Feature wall behind a water feature | Non-porous surface, so algae has nowhere to grow | /products/outdoor-stone/exterior-wall-claddings/porcelain-cladding-colors |
| Facade that must match the paving | Porcelain cladding and pavers from the same colour range | /products/outdoor-stone/pavers-and-stone-paving/porcelain-pavers |
| Coastal elevation with salt exposure | Low-absorption material and stainless fixings, checked per project | /products/outdoor-stone/exterior-wall-claddings |
Why weight decides the facade before the colour does
Cladding loads the structure twice: once as dead weight on the wall, once as wind load transferred through the fixings. An 18mm porcelain panel is roughly half the weight of 30mm natural stone for the same face area, and that difference decides whether the sub-frame is a simple rail system or an engineered grid. It also decides whether the building needs the extra structure at all. We quote both options with their weights rather than showing a colour card.
Absorption is the other number that matters, and it is where porous stone loses. Porcelain sits below 0.5% and is frost-proof through repeated cycles, so it does not need sealing and does not bloom in a coastal winter. Natural stone on a facade needs a stone chosen for the exposure, and even then it will weather — which some projects want and some do not.
Ventilated fixing is a maintenance decision. A drained and ventilated cavity lets water out and lets the wall dry, and individual panels can be replaced without disturbing their neighbours. Bonded cladding is cheaper and thinner and is the right answer on a boundary wall where nobody will ever need to reach behind it. The detail should be decided at design stage, not on site.
FAQ
Porcelain or natural stone for a facade?
Porcelain for weight, absorption and zero sealing — the default for rainscreen work above two storeys. Natural stone when the building has to read as stone at close range and the structure can carry the extra load. We quote both with their weights so the choice is made on numbers.
What thickness and sizes does the porcelain cladding come in?
18mm full-body vitrified panels, large format to minimise joints, rectified edges for narrow grout lines. Finishes are polished, soft-honed, matte and textured, in stone and wood looks across the 55-colour range, plus custom digital murals printed to full height.
Does porcelain cladding need sealing?
No. Absorption is below 0.5% and the surface is non-porous, so there is nothing to seal and nothing to re-treat. That is the main maintenance saving over natural stone, which needs periodic attention depending on the stone and the exposure.
Can it be fixed over an existing wall?
Often yes, on a ventilated sub-frame that is set off the existing wall, which avoids stripping the old render. The feasibility depends on the substrate's condition and the fixing points available. Send photographs and the wall build-up and we will say what is realistic.
Will the facade match the paving?
Only if both come from the same colour range and are ordered together. Porcelain cladding and porcelain pavers are produced in matched colours, and ordering them as one package is the way to keep a terrace and the elevation behind it reading as one material.
How is cladding packed for export?
Panels are crated on edge with foam between faces and corner protection, marked by elevation and panel number from the setting-out drawing. Large-format panels ship standing, not laid flat, and we photograph the loaded crates before the container is sealed.
Send the elevation, the wall build-up, the storey height and the climate, and we return the panel size and fixing recommendation, the colour options that match your paving, and a price per square metre with packing.
Request a Quote